International
English language, informative prices are shown in euros
Magyarország
Magyar nyelvű oldal, az árak forintban vannak megjelenítve
 
 
Ár
199.900 Ft
Rövid leírás
Angol nyelvű specifikációval.
Universal amplifier for applications from 50 to 200 watts 4 speaker connections (A and B outputs for both channels) High current for stable operation at 2 Ohms Channel pairs are bridgeable for up to 200 watts @ 4 Ohms Class AB input stage plus premium Class D power stage One Independent audio sensing trigger One Independent 12 volt trigger input Looping 12 volt trigger output for one zone Speaker level input for expanding systems w/out pre out jacks One bus input can be routed to any zone Looping output to connect additional amplifiers.
Termék kódja
37599
Súly
3.10 kg
​Full Range Mono RCA Output
80Hz low pass Mono RCA output (for sub)
Built in 80Hz low pass filter in bridged mode for driving in-wall/in-ceiling woofers or passive sub(s)
Power Output
RMS, All Channels Driven (20 Hz - 20 kHz)
50 watts x 2 @ 8Ω
90 watts x 2 @ 4Ω or 2Ω
160 watts x 1 @ 8Ω (Bridged)
200 watts x 1 @ 4Ω (Bridged) Frequency Response
10 Hz - 60 kHz, +0/-3 dB Total Harmonic Distortion
< 0.05% at typical listening levels < 1.0% at full power Interchannel
Crosstalk 70 dB at 20 kHz Input Sensitivity 700mv = Full output (50 Watts @ 8 Ω) Total Gain = 29 dB (Level controls set to Maximum) S/N Ratio > 112 dB, input shorted, IHF A-weighted DC Trigger Requirements +9 Vdc to +12 Vdc, 2 mA Audio Trigger Requirements 2 mV Audio Signal AC Power Requirement
Watts Maximum
15 Watts Typical
7.5 Watts Idle
0.5 Watts Standby
110-130 VAC 60 Hz or 220-255 VAC 50 Hz
Note AC mains voltage is set only by qualified electronics technician.
Dimensions
Width 8.5" (220 mm) Depth
Weight Net
Shipping 7 lbs (3.1kg)