International
English language, informative prices are shown in euros
Magyarország
Magyar nyelvű oldal, az árak forintban vannak megjelenítve
 
 
20%
Ár
0 Ft
14.490 Ft 18.100 Ft
9.990 Ft
104.990 Ft
1.399.000 Ft
7.490 Ft
Rövid leírás

Evergreeen RCA-RCA analóg összekötő kábel
Kiváló minőségű analóg line kábel, 99,999% tisztaságú, tömör OFC TC kábelmagjával erősebbé és mélyebbé teszi a mélyhangokat. Háromszoros árnyékolása biztosítja a tiszta infra-bass jelátvitelt.
Csúcsminőségű beépíthető hangsugárzó. Az ár egy darabra vonatkozik!
Designed by John Curl - creator of the legendary Vendetta Research phono preamp
Kiváló minőségű analóg line kábel, 99,999% tisztaságú, tömör OFC TC kábelmagjával erősebbé és mélyebbé teszi a mélyhangokat. Háromszoros árnyékolása biztosítja a tiszta infra-bass jelátvitelt az erősítő és a mélyláda között.
Termék kódja
720271
720467
720690
721394
37253
720370
Súly
0.00 kg
0.50 kg
0.50 kg
13.60 kg
11.80 kg
0.50 kg
24 karátos aranyozott csatlakozók igen igen
nalóg line összekötő kábel igen igen
Nyílvezetés a kábel köpenyén igen igen
Külső szigetelés PVC fonott köpeny PVC fonott köpeny
Kábel átmérő 2x 2 mm2 2x 2 mm2
Impedancia 50 Ohm 50 Ohm
Kábel külső átmérő 4 mm 4 mm
Szín Matt fekete Matt fekete
​Csomagolás aluminium díszdoboz aluminium díszdoboz
Típus 2-utas sztereó mennyezeti hangsugárzó
Kivágott méret (MaxSz) Ø 8-11 / 16 "
Keret mérete (MaxSzxMé) ø 10 x 3-3 / 4 "(Ø 253x96mm)
Mélység a faltól 3-7 / 8 "
Állítható magassugárzó -3dB / 0dB / + 3dB
Védelem Autoreset Polyswitch biztosíték
Meghajtók 6-1 / 2 "(16.5cm) kettős hangtekercs Polyglass mélyközép, 1" (25mm) kettős Al / Mg TNV elfordítható fordított dóm magassugárzó
Nettó súly 4,4 lb (2 kg)
Ajánlott erősítő teljesítmény 25 - 120W
Crossover frekvencia 2 400Hz
Névleges ellenállás 2x8 Ohm
Érzékenység (2,83 V / 1 m) 89dB
Frekvenciaátvitel (+ vagy-3dB) 65 Hz - 28 kHz
Nettó tömeg  2.00 kg
Minimum rendelhető mennyiség  1 db
Inputs and outputs use Vampire brand 24k gold-plated RCA jacks
Balanced outputs use Neutrik brand premium XLR jacks
MM 47k ohm, MC 47k ohm or MC variable 50-550 Ohms
RIAA accurate within 0.2 dB
Exclusively Vishay-Dale resistors in the audio path
Triple shielding; low-carbon mild steel partitions isolate the power supplies & AC wires
Dual mono design; each audio channel is separately enclosed in its own extruded aluminum enclosure
Separate high speed-soft recovery rectifiers, filter caps and voltage regulators for each channel
Superior R-core type power transformer
Mono switch can improve sound of mono and older LPs
Built-in AC line conditioner to prevent AC noise from polluting the circuits
AC polarity reverse switch can reduce hum in many systems
Non-magnetic aluminum rear panel for purest sound
Turn On Options switch manual or auto with 12v trigger input
Premium detachable heavy gauge IEC AC cord
2u Chassis, rack mountable with HRA2 (sold separately)
How the JC 3+ improves on the original JC 3 Variable MC load adjust independent for each channel from 50-550 ohms with dual gang potentiometers specially made for Parasound by Vishay.
Curl-Thompson tweaked circuits to further reduce the JC 3 silent background noise.
24k gold plated copper traces on phono module boards for utmost conductivity and most transparency/detail in the music.
47% larger low ESD power supply filter caps greater reserve for head-snapping dynamics.
82% larger R-core power transformer greater reserve for more low end impact.
Ability to turn off illumination of the front panel P logo.
Now Available in Silver or Black. Frequency Response
20 Hz – 20 kHz, +/- 0.2 dB Total Harmonic Distortion
< 0.01% at 1 kHz Signal to Noise Ratio, MM > 87 dB, input shorted, IHF A-weighted
> 78 dB, input shorted, unweighted Signal to Noise Ratio, MC
> 87 dB, input shorted, IHF A-weighted
> 67 dB, input shorted, unweighted Interchannel Crosstalk
72 dB at 1 kHz Input Impedance
MM 48 dB
MC 64 dB
Unbalanced < 100 Ω
Balanced < 100 Ω per leg
Input Sensitivity at 1 kHz
Output MC 600µV for 1 V
Output Total Gain
​XLR Pin Identification 1 = Ground (Shield) 2 = Positive 3 = Negative (Return) AC Power Requirement Standby 1 watt Power On